What Is Secondary Glazing?

Secondary glazing is a great method to increase the efficiency of thermal energy and noise reduction in existing single-glazed windows. It is more compatible with older properties than primary windows because it does not require the removal or modification of the existing frames.

A reputable company should be able to provide follow-up support after installation, and an informal call a week or two later to inquire about how you’re getting on. They must also be FENSA accredited and provide an assurance on their products.

Improved thermal efficiency

Addition of secondary glazing can help to reduce heat loss, and eliminate drafts. It can also make your home more comfortable and peaceful. However, it is crucial to recognize that this type of solution isn’t a substitute for double or triple glazing, and can only provide modest improvements in energy efficiency.

Glass is not the best insulation. However an argon layer or air between two panes could aid in reducing condensation and slowing down the heat transfer from warm to cool. Double-glazed windows with an insulation layer between the panes can prevent cold air from entering your home, and keep warm air in.

There is a broad range of systems available and some are designed to be fitted as DIY kits while others require professional installation. There are systems that can be fitted to sliding sash windows, as well as other frames that are pre-existing and some that open or close, and some that are fixed to the wall in place.

The most cost effective type of secondary glazing is the ‘lift-out’ system, which is fitted inside the window that already exists and lifts it out of a secure channel. It is suitable for windows with sash or where access to the main window is restricted like in the conservation or listed building area.

Certain systems provide better insulation than others depending on the type of glazing and the distance between the primary and secondary window. Generally speaking, the greater the gap between two panes of glass, the better the thermal performance will be.

In certain cases, adding secondary glazing to a home can increase its thermal efficiency to the point where it is comparable to the insulation offered by more modern triple or double glazing windows. This is particularly relevant for older homes where planning restrictions limit the type of replacement window that can be put in place. In these circumstances it is possible to use secondary glazing to insulate the old sash windows could be the most cost-effective option.

Reduced noise

Windows allow a significant amount of noise into homes. This is a particular issue for those who live near flight paths or railway lines. In these instances upgrading to a new double glazing will greatly reduce the impact of external sound on a property. However, not everyone wants to or is able to afford the change of all their windows and this is the place where secondary glazing comes into play. This involves adding an extra window to the frame of a home. The second window is an additional (sealed), barrier that will help insulate your home from cold air, but also external noise.

Noise pollution can be an actual issue that can have long-term health consequences if not addressed. Ecoease offers a low-cost solution to limit the amount of sound from outside that could enter your home. Our secondary double glazing is a great alternative for those looking to reduce noise pollution without spending a fortune to replace their windows.

The primary benefit of secondary glazing is that it provides an additional barrier between your home and the outside world, greatly lessening the amount of noise pollution. This is accomplished by putting frames and a separate pane within the window that has the gap being around 100mm. The second window can to be closed and opened to allow ventilation, in contrast to the primary window.

This barrier is also able to shield the space from cold air that could otherwise escape through the window and then down the wall. This will keep the room warm and help reduce the cost of energy.

In addition the secondary glazing also helps to cut down on the noise created by traffic and other outside activities. The extra barrier between your home and the outside world can provide great comfort and can make huge impact on your daily life.

Another bonus of the system is that it can be fitted to virtually any kind of window, including awning windows, vertical sliding sash windows and even sliding doors. It can be fitted to single windows or a number of windows in a home and is a much more cost-effective alternative than changing all of your windows. It also keeps the appearance of your property and can be a more appealing solution for listed buildings where changing windows may compromise their appearance.

Security boosted

Some people assume that double glazing is an expensive option, however this is not always the case. You can buy secondary glazing for less than you would believe, particularly when you consider that it’s an effective security measure. It is not only an effective barrier, but it also offers insulation. This makes it difficult for burglars to penetrate. Instead of replacing your current windows with double glazing, which is a difficult procedure in many instances and might require planning permission, you can put in secondary glazing instead.

Secondary glazing is designed to fit within your window frames that are already in place, unlike new windows that can be customized to fit any type of home. It’s a straightforward solution that provides many advantages, including reduced costs for energy and improved comfort. Additionally it can increase your home’s security overall by decreasing the amount of noise that can enter your home.

If you are in search of secondary glazing near me, it is important to take into consideration the quality of products and the service provided by the installers. Ask about their certifications, insurance documents and guarantees. You should also consider how long the company has been in business. Experienced companies will ensure that the work is done efficiently and in a timely manner.

The primary benefit of secondary glazing is that it reduces heat loss and improves draught-proofing by constructing a second window behind your existing window. This second pane is an insulation layer that reduces heat loss, and also reduces the noise that enters. It is also a cost-effective option to upgrade your windows without needing to replace them completely.

If you reside in an older house with single-glazed windows, you’re likely to spend lots of money on cooling and heating. Glass is a great conductor of heat. This means that you’re losing your hot water or electricity through your windows when you’re trying stay warm in winter.

Making the investment in secondary glazing is the most effective solution to this issue. This type of window treatment is much less expensive than installing new window units and will provide you with numerous benefits, including improved insulation, lower energy bills and increased security. You can also choose from a variety of different styles, such as hinged units and secondary glazing that can be lifted out.

Improved appearance

Many homeowners are concerned about the effect of replacing their current windows on the appearance of their house. It is possible to achieve the thermal efficiency of modern double glazing without altering its appearance of the property by installing secondary glazing instead. The installation process is a much simpler affair than replacing windows that were originally installed and can be completed much faster, too.

The process involves an independent frame and pane, which are placed on the inside of the window, typically leaving a gap of approximately 100mm between them. This serves as a barrier to heat loss and the seals made of rubber aid in separating the window from the space and limit the transmission of sound. It can also be used to increase insulation in older buildings, where planning restrictions prohibit the use of double-glazed units.

There are a number of different styles of secondary glazing that are available to suit all requirements and requirements, from systems that can be opened like windows (hinged secondary glazing) to those that are set within the existing sash frame and are fixed in the frame. Some secondary glazing systems are designed to be as discreet as they can and have frames that are completely hidden and are unobtrusive from the inside. These are particularly beneficial in situations where regular ventilation is required. opening the sash could create danger to health and safety if a large amount of wind blows into the building.

Certain companies offer permanent aluminium secondary glass that can be placed on the exterior of your existing windows, providing greater energy efficiency and a more modern appearance. This is a good option for buildings that are listed or historic and is an economical option if you have a budget constraint. It is possible to select the color and woodgrain finish to match your home, so it will look like it’s been there for a long time of the property.

Whatever type of secondary glazing you decide to choose it is essential to find a company with experience in your particular type of building and a good reputation for customer service. You can also read online reviews and ask for recommendations from your family and friends. Verify if the company is registered with professional organizations like the Glass and Glazing Federation.